Name: Juniper SRX3600
Brand: Juniper
Rating: 5 (1 reviews)

To Next Page

To Previous Page

processing, including session setup based on policies, fast packet processing for packets that match a

session, encryption and decryption, and IKE negotiation.

•

NPCs are CFM cards that receive inbound traffic from the IOCs and direct it to the appropriate SPC for

processing. Once services processing is complete, the NPC receives outbound traffic from the SPC(s)

and directs it back to the appropriate IOC. Additionally, the NPC buffers incoming traffic and queues

outgoing traffic, and also performs advanced traffic management, including DoS/DDoS protective

measures. For example, it can drop traffic to or from a particular IP address, protecting from ICMP, UDP,

and TCP SYN flooding, and buffering bursty traffic to protect the SPC.

•

The Routing Engine is a PowerPC platform that runs the Junos operating system (Junos OS). Unlike

other modules, the Routing Engine is not in the CFM form factor, and so has an assigned slot within the

chassis (RE0). Software processes that run on the Routing Engine maintain the routing tables, manage

the routing protocols used on the services gateway, control the services gateway interfaces, control

some chassis components, and provide the interface for system management and user access to the

services gateway.

•

The SRX Clustering Module (SCM) is a card that you can install in the services gateway to enable the

dual control link feature for chassis cluster supported in Junos OS Release 10.2 and later. Unlike other

modules, the SCM is not in the CFM form factor, and so has an assigned slot within the chassis (RE1).

Juniper SRX3600 Hardware Guide

Other manuals for Juniper SRX3600