Field Service Ver. 2.0 Jun. 2010 9. UTILITY MODE
71
bizhub 164ADJUSTMENT / SETTING
9.2 Starting/Exiting
9.2.1 Starting procedure
1. Press the Menu/Select key.
2. Select [UTILITY], and press the Menu/Select key.
3. The UTILITY mode screen will appear.
9.2.2 Exiting procedure
•Press the Back/Stop/Reset key.
9.3 MACHINE SETTING
9.3.1 AUTO PANEL RESET
A. Use
•To set the time it takes the auto panel reset function, which resets the panel settings
when the set period of time elapses after a copy cycle has been completed or the last
key operated, to be activated.
B. Procedure
•The default setting is 1 min.
OFF/30sec/“1min”/2min/3min/4min/5min/6min/7min/8min/9min
9.3.2 SLEEP MODE
A. Use
•To set the time it takes the machine to enter the sleep mode after a print cycle has been
completed or the last key operated.
B. Procedure
•The default setting is 15 min.
1 to 240 min (1step: 1 min)
9.3.3 SLEEP SHIFT
A. Use
•Specify whether to shift to the sleep mode immediately after a print job is executed while
the machine is in the sleep mode.
DISABLE : Enters the sleep mode when the time specified in the [SLEEP MODE] set-
ting has elapsed.
ENABLE : Enters the sleep mode immediately after the print job is executed.
B. Procedure
•The default setting is ENABLE.
“ENABLE”/DISABLE
To Next Page
Loading...
Need help?
General
