Konica Minolta BIZHUB 164 Service Manual

Field Service Ver. 2.0 Jun. 2010 11. SERVICE MODE
111
1
bizhub 164ADJUSTMENT / SETTING
11.6.8 MAIN RAM SIZE
A. Use
•To display the main memory size.
11.6.9 SERIAL NO.
A. Use
•To display the serial number of the machine.
11.6.10 CUSTOMER ID
A. Use
•To display the customer ID of the machine.
11.7 FUNCTION
11.7.1 PAPER FEED TEST
A. Use
•To check for correct paper passage of the paper feed and transport system by letting the
machine consecutively take up and feed paper without involving actual printing action.
•Here are the details of operation involved in the paper passage motion.
The scanner does not make any scan motion.
Paper is fed until the corresponding paper source runs out of paper.
No counters are activated.
(Except PM counter, maintenance counter, supplies counter)
It cannot be operated at the time of warming up.
A printing paper source can select on the screen of the function mode.
•Used when a paper misfeed occurs
B. Procedure
1. Select the paper source.
TRAY1/BYPASS
2. Press the Menu/Select key to start the paper feed test.
3. Press the Stop key to stop the paper feed test.
11.7.2 PROCESS CHECK
•HV output (for factory setting only) *Should not be used
1

Konica Minolta BIZHUB 164 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Print Resolution	600 x 600 dpi
Copy Speed	16 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Interface	USB 2.0
Warm-up Time	29 seconds
Paper Input Capacity	250 sheets
Memory	32 MB
Type	Monochrome
Maximum Paper Size	A3
Duplex Printing	Manual
Network Connectivity	No
USB Connectivity	Yes
Paper Size	A5
Fax Resolution	Not applicable