Field Service Ver. 2.0 Jun. 2010 11. SERVICE MODE
115
1
bizhub 164ADJUSTMENT / SETTING
11.7.5 SCAN TEST
A. Use
•To check that the exposure lamp turns ON properly and the scanner moves properly.
•Used when the scan motion is faulty.
B. Procedure
1. Press the Menu/Select key to start the scan test.
2. Pressing the Stop key will stop the scan test.
11.7.6 TONER SUPPLY
A. Use
•To adjust the set T/C level by replenishing an auxiliary supply of toner when a low ID
occurs due to a lowered T/C after large numbers of prints have been made of originals
having a high image density.
B. Procedure
1. Press the Menu/Select key to start the toner supply function.
2. When the toner density returns to normal or a given period of time elapses after the
toner supply is started, the machine automatically stops supplying toner.
11.8 REPORT
11.8.1 SETTING DATA LIST
A. Use
•To produce an output of a list of setting values, adjustment values, counter values and
others.
•Used at the end of setup or when a malfunction occurs.
•The printing paper size of A3, A4S, A4, B4S, 8KS, 11x17S, LegalS, LetterS, Letter
should be set.
•No counters are activated. (Except PM counter, maintenance counter, supplies counter)
•The following items are recorded;
UTILITY
MACHINE SETTING/CUSTOM SIZE MEMORY/JOB SETTING/COPY SETTING
SERVICE MODE
SERVICE’S CHOICE/ADJUST/COUNTER/TOTAL COUNTER COUNT MODE/DIS-
PLAY
1
1
To Next Page
Loading...
Need help?
General
