Field Service Ver. 2.0 Jun. 2010 9. UTILITY MODE
75
bizhub 164ADJUSTMENT / SETTING
9.6.2 TRAY1 PAPER
A. SIZE
(1) Use
•To set the paper size loaded in the tray 1.
(2) Procedure
•The default setting is as follows.
Metric area: A4
Inch area: Letter
A3/B4/A4S/“A4”/B5S/B5/A5S/A5/FLS/8K/16K S/16K/11x17/Letter S/“Letter”/
Legal/Invoice S/Invoice
SIZE INPUT/MEMORY1/MEMORY2
•When selecting “SIZE INPUT”, enter the size with the numeric keypad.
Setting range: 140 to 432 mm (Width)
: 90 to 297 mm (Length)
•The size registered on [COUSTOME SIZE MEMORY] of UTILITY MODE is set for
[Memory1]/ [Memory 2].
B. TYPE
(1) Use
•To set the media type loaded in the tray 1.
(2) Procedure
The default setting is PLAIN.
“PLAIN”/PLAIN-R/CARD1/CARD1-R/CARD2/CARD2-R/
RECYCLE/RECYCLE-R/SPECIAL
9.6.3 BYPASS PAPER
A. SIZE
(1) Use
•To set the paper size loaded in the bypass tray.
(2) Procedure
•The default setting is as follows.
Metric area: A4
Inch area: Letter
A3/B4/A4S/“A4”/B5S/B5/A5S/A5/FLS/8K/16K S/16K/11x17/Letter S/
“Letter”/Legal/Invoice S/Invoice
SIZE INPUT/MEMORY1/MEMORY2
•When selecting “SIZE INPUT”, enter the size with the numeric keypad.
Setting range: 140 to 432 mm (Width)
: 90 to 297 mm (Length)
•The size registered on [COUSTOME SIZE MEMORY] of UTILITY MODE is set for
[Memory1]/ [Memory 2].