Konica Minolta BIZHUB 164 Service Manual

Field Service Ver. 2.0 Jun. 2010 11. SERVICE MODE
87
bizhub 164ADJUSTMENT / SETTING
11.3.6 VG ADJUST
A. Use
•To adjust image density by varying Vg with changing sensitivities as the drum is used for
an extended period of time.
•Used when image problems (fog, void) occur.
•Used when the drum unit has been replaced.
Increase the setting value to eliminate void.
Decrease the setting value to eliminate fog.
B. Procedure
•The default setting is 0.
-3 to +3 (1step: 20 V)
11.3.7 TRANSFER (PLAIN)
11.3.8 TRANSFER (RECYCLE)
11.3.9 TRANSFER (CARD1)
11.3.10 TRANSFER (CARD2)
A. Use
•Adjust the image transfer output value for each paper type.
•The output value determined by the transfer output control can be adjusted within the
range of ± 30 %
•To use when the transfer failure occurs.
B. Procedure
•The default setting is 0.
-3 to +3 (1step: 10 %)

Konica Minolta BIZHUB 164 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Print Resolution	600 x 600 dpi
Copy Speed	16 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Interface	USB 2.0
Warm-up Time	29 seconds
Paper Input Capacity	250 sheets
Memory	32 MB
Type	Monochrome
Maximum Paper Size	A3
Duplex Printing	Manual
Network Connectivity	No
USB Connectivity	Yes
Paper Size	A5
Fax Resolution	Not applicable