Konica Minolta BIZHUB 164 Service Manual

Field Service Ver. 2.0 Jun. 2010 5. OTHER MAINTENANCE ITEMS
45
bizhub 164MAINTENANCE
5.4.16 Transfer roller unit
1. Open the right door.
2. Remove the transfer roller unit [1] as
shown in the illustration.
NOTE
•Indentations or dirt on the surface
of the image transfer roller
adversely affect the printed image.
Do not therefore touch or dirty with
toner the surface of the image
transfer roller.
•When handling the image transfer
roller, hold onto the shaft or bear-
ings of the roller.
•Do not place a new image transfer
roller directly on the floor.
3. To r ei n st all , r eve rs e t h e o rde r of r em ova l.
4. Tur n O N t he p owe r swi t ch .
5. Select [SERVICE MODE] - [CLEAR DATA] - [PM COUNTER] and clear the counter
value of [TRANSFER].
A0XXF2E034DA
[1]

Konica Minolta BIZHUB 164 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Print Resolution	600 x 600 dpi
Copy Speed	16 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Interface	USB 2.0
Warm-up Time	29 seconds
Paper Input Capacity	250 sheets
Memory	32 MB
Type	Monochrome
Maximum Paper Size	A3
Duplex Printing	Manual
Network Connectivity	No
USB Connectivity	Yes
Paper Size	A5
Fax Resolution	Not applicable