Field Service Ver. 2.0 Jun. 2010 11. SERVICE MODE
85
bizhub 164ADJUSTMENT / SETTING
11.2 Starting/Exiting
11.2.1 Starting procedure
1. Press the Menu/Select key.
2. Press the following keys in this order.
Quick Settings → W → W → Quick Settings → W → X
3. The SERVICE MODE menu screen will appear.
11.2.2 Exiting procedure
•Press the Back/Stop/Reset key as many times as it is required to display the initial
screen.
11.2.3 Changing the setting value in SERVICE MODE functions
1. Select the desired item using [S/T/W/X] key.
2. Select the setting value using [S/T/W/X] key.
3. Validate the selection by pressing the Menu/Select key.
4. To g o b ack to pr evi o us sc r ee n , p res s t h e B ack / St o p/R e se t key.
11.3 SERVICE’S CHOICE
11.3.1 SHIPMENT
A. Use
•To select the display of the fixed zoom ratios and paper sizes according to the applicable
marketing area.
•If this setting is changed, the following items are also changed.
- Default paper size (Inch/Metric)
- Fixed zoom ratio
- FLS paper size
- UTILITY MODE settings (Language, Tray Priority, Custom Size memory)
- Default zoom ration for 2in1/ 4in1 copy.
- Initial value of Custom size
B. Procedure
•The default setting is METRIC.
“METRIC”/INCH/TAIWAN/CHINA/L.AMERICA (METRIC)/L.AMERICA (INCH)
11.3.2 POWER SUPPLY
•Not used.
To Next Page
Loading...
Need help?
General
