(1) Left control (traveling) lever (A) Tilt
(B)
Forward to the right
To turn machine backward to the right
1. T
ilt the left control (traveling) lever backward to the
right.
(1) Left control (traveling) lever (A) Tilt
(B)
Backward to the right
4.2 How to use spin turn
To spin the machine left
1.
Tilt the left control (traveling) lever to the left.
(1) Left control (traveling) lever (A) Tilt
(B)
Left
To spin the machine right
1.
Tilt the left control (traveling) lever to the right.
(1) Left control (traveling) lever (A) Tilt
(B) Right
5. Operating the lift arms
WARNING
T
o avoid personal injury or death:
• Do not exceed the rated operating capacity of
the unit. If loads exceed the rated operating
capacity, the unit can experience a hydraulic
imbalance when half or medium "lift arms raise"
and "bucket roll back" or "auxiliary hydraulic
control" commands are input together, which
can result in the lift arms lowering slowly. If you
begin to experience a hydraulic imbalance,
either place the lift arms control in neutral or
input full raise control, and lift arms lowering
will cease.
To lower the lift arms
1. Push
the right-control-lever (front-operating-lever)
forward.
OPERATION OF THE MACHINE  OPERATION
To Next Page
Loading...
Need help?
General
