2. Press the start switch when the machine is off.
The
fuel system will automatically be purged of air
within one minute.
(1) Start switch
IMPORTANT :
• If
the purging was insufficient, the engine dies
after starting. In this case repeat step 2. again.
4. Cleaning the plastic parts and
synthetic leather
• Use
a soft cloth when wiping plastic parts or
synthetic leather.
• If the plastic or synthetic leather is very dirty, use a
soft cloth dipped in a mild detergent that has been
diluted with water.
• Wipe off any remaining moisture or detergent with a
soft cloth that has been moistened with water and
then thoroughly wrung out.
• Cleaning the plastic parts with alkaline, acidic, or
organic solvents such as alcohol or benzene can
damage them.
SERVICING AS REQUIRED  MAINTENANCE
To Next Page
Loading...
Need help?
General
