Kubota SVL75-3 User Manual

(1) Self leveling indicator
14. Master warning indicator
The master warning indicator is used to indicate broken
wire, short-circuit, and other problems.
The
master warning indicator starts blinking red if any
problem occurs. If the system senses a warning signal,
the master warning indicator starts blinking yellow.
IMPORTANT :
• If the master warning indicator lights up,
perform the appropriate inspection and
correction accordingly.
(See MAINTENANCE on page 144)
• If the master warning indicator lights up
continuously after performing, consult your
local Kubota dealer immediately.
NOTE :
• If any warnings and problems are displayed, an
alarm buzzer will beep.
(See LIST OF SCREEN on page 189)
(1) Master warning indicator
(red, yellow)
(2) Number of warnings
(3)
Error message
15. Engine oil pressure indicator
The
engine-oil-pressure-indicator lights up due to
failure of the lubricating system with the engine
running.
When start switch mode is “ACCESSORY,” the engine-
oil-pressure-indicator lights up.
When the engine starts, the engine-oil-pressure-
indicator goes out.
If the engine-oil-pressure-indicator stays on with the
engine running, stop the engine and check the engine
oil level.
(1) Engine oil pressure indicator
16. Battery charge warning indicator
The battery-charge-warning-indicator lights up if the
charging system fails with the engine running.
When
start switch mode is “ACCESSORY,” the battery-
charge-warning-indicator lights up.
When the engine starts, the battery-charge-warning-
indicator goes out.
If the battery-charge-warning-indicator stays on with the
engine running, stop the engine and check the V-belt.
(1) Battery charge warning indi-
cator
INSTRUMENT PANEL AND SWITCH INSTRUMENT PANEL
38
SVL75-3

Kubota SVL75-3 Specifications

General

Brand	Kubota
Model	SVL75-3
Category	Compact Loader
Language	English