(1) Default sort button (2) Return button
2. Periodic check
The periodic check indicator lights up and the following
message
appears on the display 10 hours before a
periodic check.
Below the indicator shows the number of items required
for maintenance.
(1) Periodic check indicator
(2)
Number of items
(3) Message
1. Press
the home switch or touch the menu icon to
make the menu bar appear on-screen.
(1) Home switch (2) Menu icon
2. Rotate
the jog dial to select the icon [Maint.] and
press the jog dial switch.
For touch operation, touch the icon [Maint.].
The list of the periodic check items appears.
(1) Icon
(1) List of periodic check items
3. Perform the servicing as listed.
4. After
servicing, rotate the jog dial to the right or to
the left to select the item you performed and press
the jog dial switch.
For touch operation, touch the item you performed.
5. Rotate the jog dial to select the icon [✔], and press
the jog dial switch. For touch operation, touch the
icon [✔].
The time associated with inspection such as [Next
Maint.] in the list of periodic check items is reset.
IMPORTANT :
• Press
the start switch to switch the mode
between “OFF” and “ACCESSORY” 10 times or
more, and then the list of periodic check items
disappears.
• When the periodic check interval has passed,
the message “Periodic check notification”
shows up. Immediately perform the specified
servicing.
NOTE :
• If you touch the periodic check indicator on the
home screen, the list of periodic check items
appears.
INSTRUMENT PANEL AND SWITCH MACHINE SETTING
To Next Page
Loading...
Need help?
General
