RECOMMENDED OILS
RECOMMENDED OILS, GREASES, AND FUELS
IMPORTANT :
•
At the time of shipment, Idemitsu Daphne Super Hydro 46ST is used for the hydraulic oil.
• Use the engine oil API service classification CJ-4 or CK-4.
• Use SAE 90 (API, GL-4, GL-5) as the drive-unit-oil for all seasons.
Application Viscosity Shell ExxonMobil MIL-Standard
Engine oil
In winter or by low
temperatures
SAE 10W
Shell Rotella T10W
Shell Rimula 10W
MIL-L-2104C
MIL-L-2104D
SAE 20W
Shell Rotella T20W-2
Shell Rimula 20W
-2
In summer or by high
ambient tempera-
tures
SAE 30
Shell Rotella T30
Shell Rimula 30
SAE 40
Shell Rotella T40
Shell Rimula 40
SAE 50 Shell Rimula 50
All-Season engine oil Multi-purpose Shell Rotella T15W-40
Gear oil
In winter or by low
temperatures
SAE 75
　
Mobilube HD Plus 80W-90
MIL-L-2105C
Shell Oil S8643
SAE 80
　
MIL-L-2105C
Shell Spirax HD80W
In summer or by high
ambient tempera-
tures
SAE 90
　 MIL-L-2105
Shell Spirax HD90 MIL-L-2105C
SAE 140
　
MIL-L-2105C
Shell Spirax HD140
All-Season gear oil Multi-purpose
Shell Spirax HD80W
Shell Spirax HD85W
MIL-L-2105C
Hydraulic oil ISO 46 Mobil DTE 10 Excel 46
Grease Shell Alvania EP2 Mobilux EP2
Fuel Light oil No. 2-D (ASTM D975)
Fuel under 5 ℃ Light oil No. 1-D (ASTM D975)
NOTE :
•
Engine oil
– Use the engine oil of suitable American-petroleum-institute (API) service classification and with
proper SAE Engine oil standards according to the ambient temperatures.
Above 25 ℃ SAE 30 or SAE 10W-30, SAE 15W-40
0 ℃ to 25 ℃ SAE 20 or SAE 10W-30, SAE 15W-40
Below 0 ℃ SAE 10W or SAE 10W-30
– See the following table for the suitable API classification engine oil and the fuel.
Fuel used
Engine oil classification (API classification)
Oil class of engines except external DPF
Ultra Low Sulfur Fuel [＜ 0.0015 % (15 ppm)] CJ-4 or CK-4
RECOMMENDED OILS, GREASES, AND FUELS  RECOMMENDED OILS
To Next Page
Loading...
Need help?
General
