Kyocera KM-5050 Service Manual

2GN/2GP/2GR-7
1-3-98
Resolution
Select default resolution.
1. Press [Change] of Resolution.
2. Select default resolution.
300 dpi/600 dpi/Fast1200
3. Press [OK].
EcoPrint
EcoPrint conserves toner when printing.
1. Press [Change] of EcoPrint.
2. Press [Off] or [On].
3. Press [OK].
KIR
The machine is equipped with the smoothing KIR func-
tions, which realizes exquisite output resolution of about
2400 dpi x 600 dpi.
1. Press [Change] of KIR.
2. Press [On] or [Off].
3. Press [OK].
Override A4/Letter
Select whether treating A4 size and Letter, which are
similar in size, as the same size when printing.
1. Press [Change] of Override A4/Letter.
2. Press [Off] or [On].
3. Press [OK].
Duplex
Select binding orientation for duplex mode.
1. Press [Change] of Duplex.
2. Select [1-sided], [2-sided Bind ShortEdge], or
[2-sided Bind LongEdge].
3. Press [OK].
Copies
Set the default number of copies.
1. Press [Change] of Copies.
2. Set the default number of copies using the [+]/[-] or
numeric keys.
Setting range: 1 to 999
3. Press [OK].
Orientation
Set the default orientation.
1. Press [Change] of Orientation.
2. Press [Portrait] or [Landscape].
3. Press [OK].
Wide A4
Increase the number of characters per line for A4 paper.
1. Press [Change] of Wide A4.
2. Press [Off] or [On].
3. Press [OK].
Form feed timeout
Receiving print data from the computer, the machine may
sometimes have to wait if there is no information identify-
ing the last page has no data any more to be printed.
When the preset timeout passes, the machine automati-
cally prints paper.
1. Press cursor down key and [Change] of Form Feed
Timeout.
2. Press [+] or [-] to set the form feed timeout.
Setting range: 5 to 495
3. Press [OK].
LF action
Set the line feed action when the machine receives the
line feed code.
1. Press the cursor down key and [Change] of
LF Action.
2. Select [LF Only], [LF and CR] or [Ignore LF].
3. Press [OK].
CR action
Set the character return action when the machine
receives the character return code.
1. Press the cursor down key and [Change] of
CR Action.
2. Select [CR Only], [LF and CR] or [Ignore CR].
3. Press [OK].

Kyocera KM-5050 Specifications

General

electrical requirements	120V, 60Hz, 11.5A
max monthly volume	200, 000 Pages Per Month
warm-up time	Within 30 Seconds
first copy out	3.5 Seconds
pages per minute	50 Letter, 26 Legal, 26 Ledger
system memory	Standard 512MB RAM, upgradeable to 1GB
hard disk drive	Standard 80GB HDD
resolution	600 x 600 DPI
standard paper sources	Dual 500 Sheet Drawers, 200 Sheet MPT
drawer paper size	5.5" x 8.5" - 11" x 17"
paper weight	13-28 lb Bond via Paper Drawers, 13 lb Bond -110 lb Index via MPT
paper size	5.5" x 8.5" – 11" x 17"
paper weight	17 – 20 lb Bond
capacity	100 Sheet DSDP / 50 Letter Size Originals Per Minute
dimensions	22.4”W x 20.7”D x 5.9”H
weight	29 lbs
stack capacity	Main Tray (A): 3, 000 Sheets; Sub Tray (B): 200 Sheets, Sub Tray (C): 50 Sheets
dimensions	26.9"W x 22.2"D x 42.8"H
weight	121 lbs
number of trays	7
dimensions	20.1"W x 15.7"D x 18.5"H
weight	22 lbs
weight	6.6 lbs
dimensions	25.9"W x 17.9”D x 10.5"H
weight	53 lbs
dimensions	22.0"W x 20.7"D x 36.0"H
weight	55 lbs
dimensions	12.2”W x 16.1”D x 6.3”H
weight	19.8 lbs
dimensions	23.0”W x 23.6”D x 12.4”H
weight	50.7 lbs
dimensions	23.0”W x 23.2”D x 12.4”H
weight	57.3 lbs

Weight and Dimensions

dimensions	23.6"W x 25.4"D x 29.3"H
weight	188 lbs