Kyocera KM-5050 Service Manual

2GN/2GP/2GR-7
1-3-101
(10) Date/Timer
Date/Time
Set the date and time for the location where you use the
machine.
CAUTION: Be sure to set Time Zone before the
Date/Time setup.
1. Press [Change] of Date/Time.
2. Enter the date and time respectively using the
[+]/[-].
NOTE: Set year (Y), month (M), date (D), hour (H),
minute (M), and second (S).
3. Press [Off] or [On] of Summer Time and press [OK].
Time zone
Set the time difference in the location you are from GMT.
1. Press [Change] of Time Zone.
2. Select the location using the cursor up/down keys.
3. Press [OK].
Date format
Select the display format of year, month, and date.
1. Press [Change] of Date Format.
2. Select [MM/DD/YYYY], [DD/MM/YYYY], or
[YYYY/MM/DD].
3. Press [OK].
Auto panel reset
If no job runs for a certain period of time, automatically
reset settings and return to the default setting.
Auto panel reset ON/OFF
Select to use auto panel reset or not.
1. Press [Change] of Auto Panel Reset.
2. Press [Off] or [On].
3. Press [OK].
Reset timer
If you select [On] for auto panel reset, set the amount of
time to wait before auto panel reset.
1. Press [Change] of Reset Timer.
2. Enter the time using the [+]/[-].
Setting range: 5 to 495 (every five seconds)
3. Press [OK].
Auto sleep
If no job runs for a certain period of time, automatically
enter sleep mode.
Auto sleep ON/OFF
Select whether to use auto sleep or not.
1. Press [Change] of Auto Sleep.
2. Press [Off] or [On].
3. Press [OK].
Sleep timer
If you select [On] for auto sleep, set the amount of time to
wait before auto sleep.
1. Press [Change] of Sleep Timer.
2. Enter the time using the [+]/[-] or numeric keys.
Setting range: 1 to 240 <minute(s)>
3. Press [OK].
Auto error clear
If an error occurs during printing, the print job stops to
wait for the next step to be taken by the user. In the auto
error clear mode, automatically clear the error after a set
amount of time elapses.
Clearing item: Print overrun/Memory is full
Auto error clear ON/OFF
Select whether to use auto error clear or not.
1. Press [Change] of Auto Error Clear.
2. Press [Off] or [On].
3. Press [OK].
Error clear timer
If you select [On] for auto error clear, set the amount of
time to wait before automatically clearing errors.
1. Press [Change] of Error Clear Timer.
2. Enter the time using the [+]/[-].
Setting range: 5 to 495 (every five seconds)
3. Press [OK].

Kyocera KM-5050 Specifications

General

electrical requirements	120V, 60Hz, 11.5A
max monthly volume	200, 000 Pages Per Month
warm-up time	Within 30 Seconds
first copy out	3.5 Seconds
pages per minute	50 Letter, 26 Legal, 26 Ledger
system memory	Standard 512MB RAM, upgradeable to 1GB
hard disk drive	Standard 80GB HDD
resolution	600 x 600 DPI
standard paper sources	Dual 500 Sheet Drawers, 200 Sheet MPT
drawer paper size	5.5" x 8.5" - 11" x 17"
paper weight	13-28 lb Bond via Paper Drawers, 13 lb Bond -110 lb Index via MPT
paper size	5.5" x 8.5" – 11" x 17"
paper weight	17 – 20 lb Bond
capacity	100 Sheet DSDP / 50 Letter Size Originals Per Minute
dimensions	22.4”W x 20.7”D x 5.9”H
weight	29 lbs
stack capacity	Main Tray (A): 3, 000 Sheets; Sub Tray (B): 200 Sheets, Sub Tray (C): 50 Sheets
dimensions	26.9"W x 22.2"D x 42.8"H
weight	121 lbs
number of trays	7
dimensions	20.1"W x 15.7"D x 18.5"H
weight	22 lbs
weight	6.6 lbs
dimensions	25.9"W x 17.9”D x 10.5"H
weight	53 lbs
dimensions	22.0"W x 20.7"D x 36.0"H
weight	55 lbs
dimensions	12.2”W x 16.1”D x 6.3”H
weight	19.8 lbs
dimensions	23.0”W x 23.6”D x 12.4”H
weight	50.7 lbs
dimensions	23.0”W x 23.2”D x 12.4”H
weight	57.3 lbs

Weight and Dimensions

dimensions	23.6"W x 25.4"D x 29.3"H
weight	188 lbs