Toyota 7BPUE15 User Manual

Toyota Orderpicker Model 7BPUE 15 Service Manual Section 7. Component Procedures
Covers and Finish
Mast Guard
Figure 7 - 13. Mast Guard
Removal
1. Lower platform fully to floor. Turn key
switch OFF and disconnect battery.
2. Loosen four screws in each mounting
bracket to gain clearance for mast guard.
3. Lift up mast guard until notches in mast
guard clear the mounting brackets.
4. Pull screen guard forward to remove.
Installation
1. Insert screen guard over the 4 mounting
brackets.
2. Lower guard until brackets align just
above the opening. See Figure
7 - 13.
3. Tighten all 6 mm socket head screws
using an Allen wrench.
00700 - CL222 - 05, 1 5 March 2005
Mast Guard

Toyota 7BPUE15 Specifications

General

Brand	Toyota
Model	7BPUE15
Category	Lifting Systems
Language	English