Toyota Orderpicker Model
7BPUE
15 Service Manual Section 5. Troubleshooting
Symptom Tables: Hydraulic Functions
Symptom Tables: Hydraulic Functions
N
O
T
E
:
If you determine that a component
failed as a result of hydraulic fluid
contamination, replace the failed
component and flush, fill, and bleed
the hydraulic system.
Lift/Lower System
Lift Function
No
Lift
-
Motor Runs, No Codes
2.
Inspect L/L solenoid for binding.
No
Lift
-
Motor Does Not Run, No Codes
ctor closed. Test for
B
-
to the
lift motor. If voltage is
Slow
Lift
-
Empty
1.
Measure voltage to lift/lower solenoid.
2.
Inspect
L/L
solenoid for binding.
3.
Inspect lift pump for low output.
4.
Inspect pressure relief valve for binding
00700
-
CL222
-
05,
1
5 March 2005