Section 7. Component Procedures
Toyota Orderpicker Model
7BPUE 15 Service Manual
Hydraulic Manifold Hydraulic Components
Hydraulic Manifold
Figure
7
-
86.
Hydraulic Manifold location
ACAUTION
Lower the operator platform before
removing the hydraulic manifold.
Remove
1.
Turn key switch OFF and disconnect
battery.
2.
Remove tractor covers.
3.
Drain hydraulic reservoir. See
"
Hydraulic
Fluid
"
on page
7
-
60.
4.
Remove hoses.
5.
Remove the two bolts holding the manifold
to the bracket.
Install
1.
Mount manifold to its bracket.
2. Replace the O
-
rings at manifold openings.
N
O
T
E
:
Lubricate O
-
rings with clean hydraulic
fluid before installing.
3.
Connect the hoses to the manifold.
4.
Fill reservoir. See
"
Lubrication
Specification Chart
"
on page A
-
2.
5.
Install tractor covers.
6.
Connect power and test lift system
function before returning truck to service.
00700
-
CL222
-
05,
1
5
March 2005
To Next Page
Loading...
Need help?
General
