Toyota 7BPUE15 User Manual

Toyota Orderpicker Model 7BPUE 15 Service Manual
Section 5. Troubleshooting
Electrical Troubleshooting Guidelines
Electrical
Troubleshooting
Guidelines
Many problems are caused by a faulty or dirty
battery. Make sure the battery is clean. See
" Battery Exterior Cleaning " on page 7 - 33.
Check the electrolyte level and state of charge.
Jack and block the lift truck whenever a
troubleshooting procedure requires
turning key switch
S1 ON. This prevents
accidents caused by unexpected lift
truck travel. Opening the Emergency
Lowering Valve will prevent unexpected
lihing.
ACAUTION
Unless otherwise directed, disconnect
the
ba~ery connector when you check
electrical circuits or components with an
ohmmeter. Electrical current can damage
the ohmmeter. Discharge residual
charge in the motor controller by
pressing
PC and PCP contactors closed
simultaneously.
Save time and trouble by looking for
simple causes first.
For information on electrical connector
location and function, see
" Electrical
Connector Locator Chart
" on page 5 - 18.
00700 - CL222 - 05, 1 5 March 2005

Toyota 7BPUE15 Specifications

General

Brand	Toyota
Model	7BPUE15
Category	Lifting Systems
Language	English