Phaser 6180MFP Multifunction Printer Service Manual 1-23
General Information
Electrical Specifications
Characteristic Specifications
Power Supply Voltage/Frequency
Line Voltages 110-127 VAC ± 10%
220-240 VAC ± 10%
Frequency Range 50/60 Hz ± 3 Hz
Current Capacity 110 V: 9.0A
220 V: 4.5A
Power Consumption AC 110 V AC 220 V
Sleep Mode 35 W or less 35 W or less
Deep Sleep Mode
(ENERGY STAR)
17 W or less 17 W or less
Standby (Fuser On) 90 W or less 90 W or less
Continuous Color or
Monochrome Printing
Average
500 W or less 500 W or less
In-rush Current
Maximum at 1st 2.5 msec 50 Amp (Cold start)
135 Amp (Hot start)
Within 10 msec 80 Amp (110 V/ 220 V/ 240 V)
85 Amp (100 V)
Leakage Current Power Current
100 V M/C (1kVAC) < 3.5 mA (UL)
200 V M/C (1.5kVAC) < 3.5 mA (IEC)
Battery Equipped with a lithium primary battery to maintain
contents of the system data and management
information for image information stored for
facsimile.
Data and information are guaranteed for more than
5 years of accumulated power Off time under the
condition where ambient temperature is 22° C.
The battery is recyclable and does not cause fire or
smoke.
To Next Page
Loading...
Need help?
General
