Xerox Phaser 6180MFP Service Manual

8-72 Phaser 6180MFP Multifunction Printer Service Manual
Service Parts Disassembly
Right Arm Assembly (PL7.1.13)
1. Open the Front Cover.
2. Remove the Fuser (page 8-12).
3. Remove the Rear Cover (page 8-18).
4. Remove the Bottom Cover (page 8-19).
5. Remove the Right Pole Inner Cover (page 8-21).
6. Remove the Right Pole Cover (page 8-22).
7. Remove the Right Cover (page 8-23).
8. Release the hook of the Shaft Pivot (PL1.2.10) securing the Right Link to
the Front Cover.
9. Remove the Shaft Pivot and the Right Link.
10. Remove 3 screws (8 mm) securing the Right Link Support (PL7.1.12) to
the printer.
11. Remove the Right Link Support.
Caution
The Support Spring may come loose when removing the Right Link
Support. Cover the area with your hand to prevent the Support Spring
from coming loose.
s6180mfp-303

Xerox Phaser 6180MFP Specifications

General

Brand	Xerox
Model	Phaser 6180MFP
Category	All in One Printer
Language	English