6-6 Phaser 6180MFP Multifunction Printer Service Manual
Adjustments and Calibrations
Calibrations
Initializing Print Meter
This process initializes the Print Meter.
1. From the Control Panel, press the System button.
2. Press the Up Arrow or Down Arrow button to find Admin Menu. Press
the OK button.
3. Press the Up Arrow or Down Arrow button to find Maintenance. Press
the OK button.
4. Press the Up Arrow or Down Arrow button to find Init Print Meter. Press
the OK button.
5. Are You Sure? message is displayed. Select Yes and press the OK
button to start the process.
6. Initializing message is displayed. The Maintenance - Init Print Meter
menu is displayed when the process is completed.
Initializing NVM (NVRAM)
This process initializes the settings stored in the NVRAM except for the
network settings. The NVRAM is a non-volatile memory that stores the printer
settings even after the power is turned Off. After executing this function and
restarting the printer, all the menu parameters are reset to their default values.
There are two options available: User Section and System Section.
■User Section (User NVM) – Unique user information stored in NVM
which includes Address Book (e-mails, computer, FTP, and Fax).
■System Section (System NVM) – System information stored in NVM
which includes default settings and some passwords for print, copy, scan,
and fax. Any information stored in the User NVM will not be cleared when
System NVM is reset.
1. Press the System button to access the printer Control Panel menu.
2. Press the Up Arrow or Down Arrow button to find Admin Menu. Press
the OK button.
3. Press the Up Arrow or Down Arrow button to find Maintenance. Press
the OK button.
4. Press the Up Arrow or Down Arrow button to find Initialize NVM. Press
the OK button.
5. Select User Section or System Section. Press the OK button.
6. Are You Sure? message is displayed. Select Yes and press the OK
button to start the process.
7. Please wait message is displayed.
8. The Ready menu is displayed when the process is completed.
To Next Page
Loading...
Need help?
General
