Xerox Phaser 6180MFP Service Manual

6-8 Phaser 6180MFP Multifunction Printer Service Manual
Adjustments and Calibrations
Scanner Calibration
This process enables manual calibration of the registration adjustment value
or correction value. Use this procedure to enter the correction value when
replacing the scanner.
N
o
t
e
Note the ADF Scanner correction values under the ADF Scanner
Assembly prior to installing the ADF Scanner Assembly to the printer.
N
o
t
e
The information in the table below is for reference only. Each scanner has
its own calibration information.
1. Turn the printer power Off.
2. Access the Service Diagnostics menu by pressing and holding the Up
and Down Arrow buttons simultaneously and turn the printer power On.
3. The Service Mode is displayed. Select Fax/Scanner Diag and press the
OK button.
4. Press the Up Arrow or Down Arrow button to find Scanner
Maintenance. Press the OK button.
5. Press the Up Arrow or Down Arrow button to find Parameter. Press the
OK button.
s6180mfp-414
Index(Hex) Value(Hex)
FB - GS6JW0000501, ADF - GD6JW0000501 >PET<
0x04 : 52
0x05 : 2B
0x06 : 1E
0x07 : 26
0x0F : 56
0x10 : 5D
0x11 : 5D
0x12 : 59
0x13 : 5D
0x14 : 64
0x15 : 66
0x16 : 62
0x08 : 46
0x09 : 21
0x0A : 1E
s6180mfp-395

Xerox Phaser 6180MFP Specifications

General

Brand	Xerox
Model	Phaser 6180MFP
Category	All in One Printer
Language	English