Xerox Phaser 6180MFP Service Manual

Phaser 6180MFP Multifunction Printer Service Manual 10-7
Plug/Jack and Wiring Diagrams
Duplex Plug/Jack Designators
Optional Feeder Plug/Jack Designators
Duplex Plug/Jack Designators
P/J Map Coordinates
Remarks
1 5 E-168 Not connected (Debug only).
427 5 F-168 Connects the Duplex Board and Duplex Fan.
428 5 F-168 Connects the Duplex Board and Duplex Unit Harness.
429 5 F-169 Connects the Duplex Board and Duplex Motor.
430 5 F-168 Connects the Duplex Board and Duplex Sensor
Harness.
431 5 F-168 Connects the Duplex Board and Duplex Clutch.
2720 5 I-169 Connects the Duplex (Duplex Unit Harness) and
printer.
4301 5 E-167 Connects the Duplex Jam Sensor and Duplex Sensor
Harness.
Optional Feeder Plug/Jack Designators
P/J Map Coordinates
Remarks
273 6 H-183 Connects the Optional-550 Sheet Feeder (Feeder Unit
Harness) and printer.
419 6 G-180 Connects the Optional Feeder Board and Feeder Unit
Harness.
420 6 G-180 Connects the Optional Feeder Board and Tray 3 Turn
Harness.
421 6 G-179 Connects the Optional Feeder Board and Tray 3 Chute
Harness.
422 6 G-179 Connects the Optional Feeder Board and Tray 3
Motor Harness.
4201 6 H-185 Connects the Turn Clutch and Tray 3 Turn Harness.
4211 6 I-184 Connects the Optional Size Switch and Tray 3 Chute
Harness.
4212 6 H-184 Connects the Tray 3 Chute Harness and Tray 3 No
Paper Harness.
4213 6 H-185 Connects the Feed Clutch and Tray 3 Chute Harness.
4221 6 G-185 Connects the Optional Feeder Drive (Optional Feeder
Motor) and Tray 3 Motor Harness.
4222 6 G-185 Connects the Optional Feeder Drive (Optional Feeder
Motor) and Tray 3 Motor Harness.
42121 6 D-183 Connects the Tray 3 No Paper Sensor and Tray 3 No
Paper Sensor Harness.
1 6 G-180 Not connected (Debug only).

Xerox Phaser 6180MFP Specifications

General

Brand	Xerox
Model	Phaser 6180MFP
Category	All in One Printer
Language	English