Phaser 6180MFP Multifunction Printer Service Manual 1-29
General Information
Image Specifications
o
e
The printer has 4 mm margins on all sides.
■ Refer to “Print-Quality Troubleshooting” on page 5-1 for detailed
specifications.
Color (Simplex and Duplex)
Characteristic Specifications
Color Registration Worst target of 3.
< 170
μm
Black/White (Simplex and Duplex)
Characteristic Specifications
Scanning Area
Maximum Scanning Area
■ Document Glass: 215.9 mm (8.5 in.) x 297.0 mm
(11.7 in.)
■ ADF: 215 mm (8.5 in.) x 355.6 mm (14.0 in.)
Print Area
Maximum Print Area 210.9 mm (8.2 in.) x 351.6 mm (13.8 in.)
Guaranteed Print Area 207.9 mm (8.2 in.) x 347.6 mm (13.7 in.)
Skew 190 mm (7.5 in.) ± 1.2 mm (.05 in.)
Perpendicularity 114.5 mm (4.5 in.) ± 0.8 mm (.03 in.)
Parallelism
Horizontal 180 mm (7.1 in.) ± 1.2 mm (.05 in.)
Vertical 234 mm (9.2 in.) ± 1.2 mm (.05 in.)
Linearity
Horizontal 190 mm (7.5 in.) ± 0.5 mm (.02 in.)
Vertical 234 mm (9.2 in.) ± 0.5 mm (.02 in.)
Slant 269 mm (10.6 in.) ± 1.2 mm (.05 in.)
Magnification Error
Horizontal Simplex 190 mm (7.5 in.)± 0.5 mm (.02 in.)
Horizontal Duplex 190 mm (7.5 in.) ± 0.8 mm (.03 in.)
Vertical Simplex 234 mm (9.2 in.) ± 0.5 mm (.02 in.)
Vertical Duplex 234 mm (9.2 in.) ± 0.8 mm (.03 in.)
Registration
Leading Edge 10.0 mm (.40 in.) ± 2.0 mm (.08 in.)
Side Edge 8.5 mm (.33 in.) ± 2.5 mm (.09 in.)
To Next Page
Loading...
Need help?
General
