SOLUCI
NDE
PROBLEMAS
8.3



Fuel System
• Improper carburetor adjustment
• Setting the wrong fuel level
• Blocked air filter element

Compression System
• Many carbon deposition
• improperly adjusted valve timing
• Valve clearance maladjusted

Motor oil
• Incorrect oil level
• Incorrect oil quality
• Low oil level

Fuel System
1. Throttle Body
• Damaged or loose throttle union
2. Air filter
• The air filter element is clogged

Chassis
1. Brake (s)
• Drag Brake

Electrical System
1.
Plug
• Distance between the spark plug electrodes
incorrect
• heat range spark plug incorrect
2. Ignition system
• Faulty CDI
Cooling system
overcooling
1.
Thermostat
• The thermostat is open


POOR PERFORMANCE BRAKE
1. Disc brake
• Wear of the brake pads
• Brake disc wear
• Air in hydraulic brake system
• Loss of brake fluid
• Failure to set the brake caliper
• Failure to seal the brake caliper
• Coupling screws loose
• Damage to the brake hose
• Grease or oil on the brake disc
• Grease or oil on brake pads
• Brake fluid level incorrect
FRONT FORK FAILURE oil leak
• Inner tube bent, damaged or corroded
• broken or damaged outer tube
• Oil seal installed incorrectly
• Edges damaged oil seal
• Incorrect oil level (high)
• Screw loose cushion rod
• copper washer damper rod damaged
• O-ring screw cap damaged
Malfunction
• bent or damaged inner tube
• Outer tube bent or damaged
• damaged fork spring
• damper rod bent or damaged
• Incorrect oil viscosity
• Incorrect oil level


UNSTABLE HANDLING
1.
Handlebar
• Folding handlebar or incorrectly installed
2. Components of the steering column
• Upper bracket improperly
installed
• Lower bracket improperly
installed
(Void improperly tightened nut)
• Stem bending direction
• Ball or damaged tracks
3. Bar (s) of the front fork
• Oil levels mixed (both front fork legs)
• uneven spring tension (both front fork
legs)
• fork spring fractured
• bent or damaged inner tube
• Outer tube bent or dañad
4.
Rocker
• Bearing Wear
• Bent or damaged swingarm