CHASSIS SPECIFICATIONS
2-9
EAS29130
CHASSIS SPECIFICATIONS
Chassis
Frame type Aluminum die-cast and steel tube frame
Caster angle 5.0°
Camber angle -1.0°
Kingpin angle 14.8°
Kingpin offset 2.8 mm (0.11 in)
Trail 21.0 mm (0.83 in)
Tread rear (STD) 900.0 mm (35.43 in)
Tread front (STD) 940.0 mm (37.01 in)
Toe-in (with tires touching the ground) 2.0–12.0 mm (0.08–0.47 in)
Front wheel
Wheel type Panel wheel
Rim size 10 × 5.5AT
Rim material Aluminum
Wheel travel 230 mm (9.1 in)
Radial wheel runout limit 2.0 mm (0.08 in)
Lateral wheel runout limit 2.0 mm (0.08 in)
Rear wheel
Wheel type Panel wheel
Rim size 9 × 8.0AT
Rim material Aluminum
Wheel travel 256 mm (10.1 in)
Radial wheel runout limit 2.0 mm (0.08 in)
Lateral wheel runout limit 2.0 mm (0.08 in)
Front tire
Type Tubeless
Size AT21 × 7R10
Manufacturer/model DUNLOP/KT341 Radial
Wear limit (front) 3 mm (0.12 in)
Rear tire
Type Tubeless
Size AT20 × 10R9
Manufacturer/model DUNLOP/KT345 Radial
Wear limit (rear) 3 mm (0.12 in)
Tire air pressure (measured on cold tires)
Recommended
Front 27.5 kPa (0.275 kg/cm² , 4.0 psi)
Rear 27.5 kPa (0.275 kg/cm² , 4.0 psi)
Minimum
Front 24.5 kPa (0.245 kgf/cm², 3.6 psi)
Rear 24.5 kPa (0.245 kgf/cm², 3.6 psi)
Off-road riding
Front 27.5 kPa (0.28 kg/cm² , 4.0 psi)
Rear 27.5 kPa (0.28 kg/cm² , 4.0 psi)
To Next Page
Loading...
Need help?
General
