ELECTRICAL SPECIFICATIONS
2-12
EAS29140
ELECTRICAL SPECIFICATIONS
Voltage
System voltage 12 V
Ignition system
Ignition system TCI (digital)
Advancer type Digital
Ignition timing (B.T.D.C.) 9.0°/1600 r/min
Engine control unit
Model/manufacturer TBDF18/DENSO
Fuel injection sensor
Crankshaft position sensor resistance 192.0–288.0 Ω at 20 °C (68 °F)
Intake air pressure sensor output voltage 3.00–4.00 V
Intake air temperature sensor resistance 2.21–2.69 Ω at 20 °C (68 °F)
Coolant temperature sensor resistance 2.32–2.59 kΩ at 20 °C (68 °F)
0.310–0.326 kΩ at 80 °C (176 °F)
Ignition coil
Model/manufacturer JO267/DENSO
Minimum ignition spark gap 6.0 mm (0.24 in)
Primary coil resistance 3.40–4.60 Ω at 20 °C (68 °F)
Secondary coil resistance 10.40–15.60 kΩ at 20 °C (68 °F)
Spark plug cap
Material Resin
Resistance 10.0 kΩ at 20 °C (68 °F)
AC magneto
Model/manufacturer LMX58/DENSO
Standard output 14.0 V, 17.2 A at 5000 r/min
Stator coil resistance 0.248–0.372 Ω at 20 °C (68 °F)
Voltage regulator
Rectifier/regulator
Regulator type Semi conductor-short circuit
Model/manufacturer SH650D-11/SHINDENGEN
Regulated voltage (DC) 14.1–14.9 V
Rectifier capacity 18.0 A
Withstand voltage 200.0 V
Battery
Model GT9B-4
Voltage, capacity 12 V, 8.0 Ah
Manufacturer GS YUASA
Ten hour rate amperage 0.8 A
Headlight
Bulb type Krypton bulb
To Next Page
Loading...
Need help?
General
