ABB REC650 User Manual

Function block
SRMEMORY
SET
RESET
OUT
NOUT
IEC09000293-1-en.vsd
IEC09000293 V1 EN
Figure 176: SRMEMORY function block
Signals
Table 284: SRMEMORY Input signals
Name Type Default Description
SET BOOLEAN 0 Input signal to set
RESET BOOLEAN 0 Input signal to reset
Table 285: SRMEMORY Output signals
Name Type Description
OUT BOOLEAN Output signal
NOUT BOOLEAN Inverted output signal
Settings
Table 286: SRMEMORY Group settings (basic)
Name
Values (Range) Unit Step Default Description
Memory Off
On
- - On Operating mode of the memory function
11.3.1.11 Reset-set with memory function block RSMEMORY
Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Reset-set with memory function block RSMEMORY - -
Functionality
The Reset-set with memory function block (RSMEMORY) is a flip-flop with memory
that can reset or set an output from two inputs respectively. Each RSMEMORY
function block has two outputs, where one is inverted. The memory setting controls if
the flip-flop after a power interruption will return the state it had before or if it will be
reset. For a Reset-Set flip-flop, RESET input has higher priority over SET input.
Section 11 1MRK 511 287-UEN A
Logic
358
Technical manual

ABB REC650 Specifications

General

Brand	ABB
Model	REC650
Category	Control Unit
Language	English