ABB REC650 User Manual

Time Synch Error
Internal Warning
GENTS SYNC ERROR
GENTS SYNC OK
S
R
GENTS RTC ERROR
S
R
>1
Internal Fail
LIODEV STOPPED
S
R
Real Time Clock Error
e.g.
BIO1- ERROR
Settings changed
SETTINGS CHANGED
RTE FATAL ERROR
WDOG STARVED
SW Watchdog Error
GENTS RTC OK
GENTS TIME RESET
>1
LIODEV STARTED
>1
LIODEV FAIL
>1
Runtime Exec Error
>1
RTE APP FAILED
S
R
RTE ALL APPS OK
>1
Setting groups changed
SETTINGS CHANGED
CHANGE LOCK ON
S
R
Change lock
CHANGE LOCK OFF
Runtime App Error
FTF FATAL ERROR
File System Error
S
R
IEC
61850
READY
DNP
3 STARTUP
ERROR
S
R
DNP
3
READY
IEC 61850 Error
DNP 3 Error
IEC 61850 NOT READY
IEC09000381-2-en.vsd
IEC09000381 V2 EN
Figure 264: Self supervision, function block internal signals
Some signals are available from the INTERRSIG function block. The signals from
INTERRSIG function block are sent as events to the station level of the control
system. The signals from the INTERRSIG function block can also be connected to
binary outputs for signalization via output relays or they can be used as conditions for
other functions if required/desired.
Individual error signals from I/O modules can be obtained from respective module in
the Signal Matrix tool. Error signals from time synchronization can be obtained from
the time synchronization block INTERSIG.
15.1.4.1 Internal signals
SELFSUPEVLST function provides several status signals, that tells about the
condition of the IED. As they provide information about the internal status of the IED,
Section 15 1MRK 511 287-UEN A
Basic IED functions
546
Technical manual

ABB REC650 Specifications

General

Brand	ABB
Model	REC650
Category	Control Unit
Language	English