SoftkeyProgrammable Feature
Button
Dedicated Feature ButtonFeature Name
SupportedSupportedSpeed Dial
SupportedSpeed Dial Line Status
Supported (only displayed
during connected call
transfer scenario)
SupportedTransfer
Enable Users to Configure Features on Line Keys
You can enable users to configure these features on line keys:
• Speed dial
• Busy Lamp Field (BLF) to monitor a coworker's line, with the following options:
• Speed dial to the monitored line
• Call pickup from the monitored line
Users can select any available line keys to configure features. They can also select a line key that is functioning
as a speed-dial key or as a BLF key. The user's configuration will override any existing configuration for the
line key. Users cannot select line keys on which you have configured other features. If a user selects a BLF
list key, the phone adjusts the positions of the BLF list keys using the next available line keys.
For the BLF feature options, the phone subscribes to the BLF list URI that you specify, to be notified of
changes in the status of the monitored lines. If you do not specify a BLF list URI, the phone subscribes to
$USER@$PROXY.
You can also configure the parameters in the phone configuration file with XML(cfg.xml) code. For the
parameter definitions, see Parameters for Features on Line Keys , on page 148.
Procedure
Step 1 Disable the line key on which you allow users to configure the features. Do and of the following actions on
the phone administration web interface:
• Set Extension to Disabled for the specific line key on the Voice > Phone tab.
Line-specific prameter in the configuration file (cfg.xml): <Extension_1_
ua="na">Disabled</Extension_1_>
• Set Line Enable to No for the specific line key on the Voice > Ext(n) tab.
Line-specific prameter in the configuration file (cfg.xml): <Line_Enable_1_
ua="na">No</Line_Enable_1_>
Step 2 Select Voice > Att Console.
Step 3 In the General section, configure Customizable PLK Options as the following:
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
147
Cisco IP Phone Configuration
Enable Users to Configure Features on Line Keys
To Next Page
Loading...
Need help?
General
