DescriptionParameter
DHCP options, delimited by commas, used to retrieve firmware and profiles.
Default: 17,160,159
DHCPv6 Option To
Use
Set Up Your Phones for Activation Code Onboarding
If your network is configured for Activation Code Onboarding, you can set up new phones to register
automatically in a secure way. You generate and provide each user with a unique 16-digit activation code.
The user enters the activation code, and the phone automatically registers. This feature keeps your network
secure because the phone can't register until the user enters a valid activation code.
Activation codes can be used only once, and have an expiry date. If a user enters an expired code, the phone
displays Invalid activation code on the screen. If this happens, provide the user with a new code.
This feature is available in firmware release 11-2-3MSR1, BroadWorks Application Server Release 22.0
(patch AP.as.22.0.1123.ap368163 and its dependencies). However, you can change phones with older firmware
to use this feature. To do this, use the following procedure.
Before you begin
Ensure that you allow the activation.webex.com service through your firewall to support onboarding via
activation code.
Access the phone web page. Access the Phone Web Interface, on page 104
Procedure
Step 1 Reset the phone to the factory settings.
Step 2 Select Voice > Provisioning > Configuration Profile.
Step 3 Enter the profile rule in the Profile Rule field as described in the Activation Code Provisioning Parameters,
on page 55 table.
Step 4 In the Firmware Upgrade section, enter the upgrade rule in the Upgrade Rule field as described in the
Activation Code Provisioning Parameters, on page 55 table.
Step 5 Submit All Changes.
Activation Code Provisioning Parameters
The following table defines the function and usage of the activation code parameters in the Configuration
Profile section under the Voice > Provisioning tab in the phone web page. It also defines the syntax of the
string that is added in the phone configuration file (cfg.xml) with XML code to configure a parameter.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
55
Cisco IP Phone Provisioning
Set Up Your Phones for Activation Code Onboarding
To Next Page
Loading...
Need help?
General
