Cisco 8861 Guide

Table 24: Parameters for Ringtone
DescriptionParameter
Ring tone scripts for various ringtones.
In the phone configuration XML file (cfg.xml), enter
a string in this format:
<!-- Ringtone -->
<Ring1
ua="na">n=Sunrise;w=file://Sunrise.rwb;c=1</Ring1>
<Ring2 ua="na">n=Chirp
1;w=file://chirp1.raw;c=1</Ring2>
<Ring3 ua="na">n=Chirp
2;w=file://chirp2.raw;c=1</Ring3>
<Ring4
ua="na">n=Delight;w=file://Delight.rwb;c=1</Ring4>
<Ring5
ua="na">n=Evolve;w=file://Evolve.rwb;c=1</Ring5>
<Ring6
ua="na">n=Mellow;w=file://Mellow.rwb;c=1</Ring6>
<Ring7
ua="na">n=Mischief;w=file://Mischief.rwb;c=1</Ring7>
<Ring8
ua="na">n=Reflections;w=file://Reflections.rwb;c=1</Ring8>
<Ring9
ua="na">n=Ringer;w=file://Ringer.rwb;c=1</Ring9>
<Ring10
ua="na">n=Ascent;w=file://Ascent.rwb;c=1</Ring10>
<Ring11 ua="na">n=Are you
there;w=file://AreYouThereF.raw;c=1</Ring11>
<Ring12
ua="na">n=Chime;w=file://Chime.raw;c=1</Ring12>
<Silent_Ring_Duration
ua="na">60</Silent_Ring_Duration>
Ring1 to Ring12
Controls the duration of the silent ring. For example,
if the parameter is set to 20 seconds, the phone plays
the silent ring for 20 seconds then sends 480 response
to INVITE message.
In the phone configuration XML file (cfg.xml), enter
a string in this format: <Ring1
ua="na">n=Sunrise;w=file://Sunrise.rwb;c=1</Ring1>
<Silent_Ring_Duration
ua="na">60</Silent_Ring_Duration>
Silent Ring Duration
Add Distinctive Ringtone
You can configure the characteristics of each ring tone using a ring tone script. When the phone receives SIP
Alert-INFO message and the message format is correct, then the phone plays the specified ringtone. Otherwise,
the phone plays the default ringtone.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
175
Cisco IP Phone Configuration
Add Distinctive Ringtone

Cisco 8861 Specifications

General

Brand	Cisco
Model	8861
Category	IP Phone
Language	English