New and Changed SectionsRevisions
GeneralAdded a new field in the General table to support the
new parameter“ KEM Type” that is added to the
phone web page
Key Expansion Module Does Not Go Through the
Normal Start Up Process
Added a troubleshooting scenario for new MPP key
expansion modules—Cisco IP Phone 8851/8861 Key
Expansion Module and Cisco IP Phone 8865 Key
Expansion Module
Turn the Wi-Fi On or Off from the Phone Web
Interface
Set Up a Wi-Fi Profile from the Phone Web Page and
the XML Provisioning Server
Add new task to support Wi-Fi management and
Wi-Fi profile
Wi-Fi SettingsAdded a new table to support the new parameter Wi-Fi
Settings that is added to the phone web page
Wi-Fi Profile(n)Added a new table to support the new parameter Wi-Fi
Profile (n) that is added to the phone web page
Cisco Headset 500 Series Customization
,
Added a topic of Cisco Headset 500 Series
customization
Accessories Overview for Cisco IP Phone 8800 Series
with Multiplatform Firmware
Cisco Headset
Cisco Headset
Added topics to support Cisco Headset 521, 522, 561,
and 562
Set the Upgrade Rule for the Cisco Headset 500 SeriesAdded a topic for upgrading Cisco Headset 500 Series
New and Changed for Firmware Release 11.2(1)
New or Changed SectionsRevisions
Enable User Access to the Phone Interface Menus
System Configuration
Updated the topics to support LCD screen does not
honor "ro" and "na" attribute
Configure the SIP TransportAdded a new topic to support NAPTR
Telephony Features for Cisco IP Phone
SIP Settings
Updated the topics to support NAPTR
Configure a Privacy HeaderAdded a new topic to support SIP privacy header
SIP SettingsUpdated the topic to support SIP privacy header
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
14
New and Changed Information
New and Changed for Firmware Release 11.2(1)