Cisco 8861 Guide

Step 3 Click Submit All Changes.
Parameters for Monitoring Multiple Users' Lines
The following table defines the function and usage of the BLF parameters in the General section under the
Voice > Att Console tab in the phone web interface. It also defines the syntax of the string that is added in
the phone configuration file (cfg.xml) with XML code to configure a parameter.
Table 17: Parameters for Monitoring Multiple Users' Lines
Description and default valueParameter
The Uniform Resource Identifier (URI) of the Busy Lamp Field (BLF) list that you
have set up for a user of the phone, on the BroadSoft server.
This field is only applicable if the phone is registered to a BroadSoft server. The BLF
list is the list of users whose lines the phone is allowed to monitor. See Phone
Configuration for Monitoring Other Phones, on page 151 for details.
The BLF List URI must be specified in the format <URI_name>@<server>. The
BLF List URI specified must be the same as the value configured for the List URI:
sip parameter on the BroadSoft server.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<BLF_List_URI
ua="na">MonitoredUsersList@sipurash22.com</BLF_List_URI>
• On the phone web interface, specify the BLF list that is defined on the BroadSoft
server.
Default: Blank
BLF List URI
Controls whether the phone uses its line keys to monitor the BLF list, when monitoring
of the BLF list is active.
When set to No, the phone uses only the Key Expansion Module keys to monitor the
BLF list.
This setting only has significance when BLF List is set to Show.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Use_Line_Keys_For_BLF_List ua="na">Yes</Use_Line_Keys_For_BLF_List>
• On the phone web interface, set this field to Yes to use the unregistered line keys
to monitor the BLF list entries. Set it to No to prevent the line keys from being
used for monitoring the BLF list entries.
Default: No
Use Line Keys For
BLF List
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
152
Cisco IP Phone Configuration
Parameters for Monitoring Multiple Users' Lines

Cisco 8861 Specifications

General

Brand	Cisco
Model	8861
Category	IP Phone
Language	English