Cisco 8861 Guide

Parameters for SIP Settings on Extensions
The following table defines the function and usage of the parameters in the SIP Settings section under the
Ext(n) tab in the phone web interface. It also defines the syntax of the string that is added in the phone
configuration file with XML(cfg.xml) code to configure a parameter.
Table 75: SIP Settings in Extensions
DescriptionParameter
Specifies the transport protocol for SIP messages.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<SIP_Transport_1_
ua="na">UDP</SIP_Transport_1_>
• In the phone web page, select the transport
protocol type.
• UDP
• TCP
• TLS
• AUTO
AUTO allows the phone to select the appropriate
protocol automatically, based on the NAPTR
records on the DNS server. See Configure the
SIP Transport, on page 193 for more details.
Default: UDP
SIP Transport
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
366
Cisco IP Phone Installation
Parameters for SIP Settings on Extensions

Cisco 8861 Specifications

General

Brand	Cisco
Model	8861
Category	IP Phone
Language	English