Cisco 8861 Guide

Session ID Parameters
The following table defines the function and usage of each parameter in the SIP Settings section in the Voice >
Ext(n) tab of the phone web page. It also defines the syntax of the string that is added in the phone configuration
file with XML (cfg.xml) code to configure a parameter.
Description and Default ValueParameter Name
Controls the SIP session ID support.
Perform one of the following
• In the phone configuration file with XML
(cfg.xml) enter a string in this format.
<SIP_SessionID_Support_1_
ua="na">Yes</SIP_SessionID_Support_1_>
• In the phone web page select Yes to enable the
feature.
Allowed values: Yes/No
Default: Yes.
SIP SessioID Support
Select the Line Key LED Behavior
You can choose the Line Key LED Behavior in your multiplatform phone.
In the phone web page, you can choose one of the following options:
• Default
• Preset 1
• Custom
For more information, see Line Key LED Behavior Customization, on page 222.
Before you begin
Access the Phone Web Interface, on page 104
Procedure
Step 1 Select Voice > Phone.
Step 2 In the Line Key LED Pattern section, choose an option from the Custom LED Type drop down list.
You can also configure this parameter in the configuration file (cfg.xml) by entering a string in this format:
<Custom_LED_Type ua="na">Default</Custom_LED_Type>
The allowed values are Default|Preset 1|Custom. The default value is Default.
Step 3 Click Submit All Changes.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
221
Cisco IP Phone Configuration
Session ID Parameters

Cisco 8861 Specifications

General

Brand	Cisco
Model	8861
Category	IP Phone
Language	English