Description and default valueParameter
This field functions only on the line keys with the Extension field set to Disabled.
Use the following syntax to configure a line key with the BLF, speed dial, and call
pickup features:
• Busy Lamp Field (BLF)
Example: fnc=blf;sub=BLF_List_URI@$PROXY;ext=user_ID@$PROXY
• BLF with Call Pickup
Example: fnc=blf+cp;sub=BLF_List_URI@$PROXY;ext=user_ID@$PROXY
• BLF with Speed Dial
Example: fnc=blf+sd;sub=BLF_List_URI@$PROXY;ext=user_ID@$PROXY
• BLF with Speed Dial and Call Pickup
Example: fnc=blf+sd+cp;sub=BLF_List_URI@$PROXY;ext=user_ID@$PROXY
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Extended_Function_1_>fnc=blf;sub=BLF_List_URI@$PROXY;ext=user_ID@$PROXY</Extended_Function_1_>
• In the phone web interface, configure the field with a valid syntax to enable
monitoring another user or extension using the line key.
Default: Empty
Extended Function
Enable Conference Button with a Star Code
You can add a star code to the Conference button so that your user can press the button only once to add many
active calls to a conference. You can enable this feature from the phone web page.
Before you begin
• The phone server must suppport this feature.
• Access the phone administration web page. See Access the Phone Web Interface, on page 104.
Procedure
Step 1 Select Voice > Ext(n), where n is an extension number.
Step 2 In the Call Features Settings section, configure the Conference Single Hardkey and Conference Bridge
URL fields as definined in Conference Button Parameters, on page 156.
You can also enable the conference button with a xml file. Enter a string in this format:
<Conference_Bridge_URL_1_ ua="na">*55</Conference_Bridge_URL_1_>
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
155
Cisco IP Phone Configuration
Enable Conference Button with a Star Code
To Next Page
Loading...
Need help?
General
