Cisco 8861 Guide

DescriptionParameter
Enables Daylight Saving Time.
Default: Yes
Daylight Saving Time Enable
Choose the time format for the phone (12-hour or
24-hour).
Default: 12hr
Time Format
Choose the date format for the phone (month/day or
day/month).
Default: month/day
In the phone configuration XML file (cfg.xml), enter
a string in this format:
<!-- Time -->
<Set_Local_Date__mm_dd_yyyy_ ua="na"/>
<Set_Local_Time__HH_mm_ ua="na"/>
<Time_Zone ua="na">GMT-08:00</Time_Zone>
<!--
available options:
GMT-12:00|GMT-11:00|GMT-10:00|GMT-09:00|
GMT-08:00|GMT-07:00|GMT-06:00|GMT-05:00|GMT-04:00|GMT-03:30|
GMT-03:00|GMT-02:00|GMT-01:00|GMT|GMT+01:00|GMT+02:00|GMT+03:00|
GMT+03:30|GMT+04:00|GMT+04:30|GMT+05:00|GMT+05:30|GMT+05:45|
GMT+06:00|GMT+06:30|GMT+07:00|GMT+08:00|GMT+09:00|GMT+09:30|
GMT+10:00|GMT+11:00|GMT+12:00|GMT+13:00|GMT+14:00
-->
<Time_Offset__HH_mm_ ua="na"/>
<Ignore_DHCP_Time_Offset
ua="na">Yes</Ignore_DHCP_Time_Offset>
<Daylight_Saving_Time_Rule
ua="na">start=3/-1/7/2;end=10/-1/7/2;
save=1</Daylight_Saving_Time_Rule>
<Daylight_Saving_Time_Enable
ua="na">Yes</Daylight_Saving_Time_Enable>
<Time_Format ua="na">12hr</Time_Format>
<!-- available options: 12hr|24hr -->
<Date_Format ua="na">month/day</Date_Format>
<!-- available options: month/day|day/month
-->
Date Format
Configure Daylight Saving Time
The phone supports automatic adjustment for daylight saving time.
The time of the log messages and status messages are in UTC time. The time zone setting does not affect
them.
Note
Before you begin
Access the phone administration web page. See Access the Phone Web Interface, on page 104.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
407
Cisco IP Phone Installation
Configure Daylight Saving Time

Cisco 8861 Specifications

General

Brand	Cisco
Model	8861
Category	IP Phone
Language	English