Step 5 Click Submit All Changes.
Parameters for Wi-Fi Settings
The following table defines the function and usage of each parameter in the Wi-Fi Settings section under the
System tab in the phone web page. It also defines the syntax of the string that is added in the phone
configuration file with XML(cfg.xml) code to configure a parameter.
Table 67: Wi-Fi Settings Parameters Table
DescriptionParameter
Turns Wi-Fi on or off on your phone.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Phone-wifi-on ua="rw">No</Phone-wifi-on>
• In the phone web interface, set to Yes to turn on
the Wi-Fi or set to No to turn it off.
Default: Yes
Phone-wifi-on
Connect the Phone to a Wi-Fi Manually
When you set up a Wi-Fi profile, it provides you the options to connect the phone manually to a wireless
network. You can establish the connection from the Wi-Fi profile screen or from the Setup Wi-Fi screen.
The top most Wi-Fi profile in the Wi-Fi profile screen gets connected automatically when the phone provisions.
Before you begin
Turn on the Wi-Fi of your phone.
Procedure
Step 1 Press Applications .
Step 2 Select Network configuration > Wi-Fi configuration > Wi-Fi profile.
Step 3 In the Wi-Fi profile screen, do any of the actions to connect to Wi-Fi.
• Select any of the configured Wi-Fi profile and click Connect.
• Press Scan and select one wireless in the Connect to Wi-Fi screen. In the Setup Wi-Fi screen, enter
values in the fields and press Connect.
See the Profile Parameter table in the Set Up a Wi-Fi Profile from the Phone, on page 330 for the field values.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
323
Cisco IP Phone Installation
Parameters for Wi-Fi Settings
To Next Page
Loading...
Need help?
General
