DescriptionParameter
Allows you to enter password for the network profile
that you create. You need to enter this value when the
security mode is PSK.
Passphrase
Allows you to select the wireless signal frequency
band that is used in the WLAN. Options are:
• Auto
• 2.4 GHz
• 5 GHz
Default: Auto
Frequency band
Step 6 Press Save.
Set Up a Wi-Fi Profile
You can configure a Wi-Fi profile from the phone web page or from remote device profile resync and then
associate the profile to the available Wi-Fi networks. You can use this Wi-Fi profile to connect to a Wi-Fi.
You can configure maximum of four profiles.
The profile contains the parameters required for phones to connect to the phone server with Wi-Fi. When you
create and use a Wi-Fi profile, you or your users do not need to configure the wireless network for individual
phones.
A Wi-Fi profile enables you to prevent or limit changes to the Wi-Fi configuration on the phone by the user.
We recommend that you use a secure profile with TFTP encryption enabled to protect keys and passwords
when you use a Wi-Fi profile.
When you set up the phones to use EAP-FAST, PEAP-MSCHAPV, or PEAP-GTC authentication or security
mode, your users need individual credentials to connect to an access point.
Before you begin
• Access the phone administration web page. See Access the Phone Web Interface, on page 104.
Procedure
Step 1 Select Voice > System.
Step 2 On the phone web page, select User Login > Advanced > Voice > System.
Step 3 Set the Wi-Fi Profile fields as described in the Wi-Fi Profile (n) , on page 333 table.
Step 4 Set the Wi-Fi Profile fields with the information that your administrator provided.
Step 5 Click Submit All Changes.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
332
Cisco IP Phone Installation
Set Up a Wi-Fi Profile
To Next Page
Loading...
Need help?
General
