Cisco 8861 Guide

SDP Payload Types
DescriptionParameter
G722 Dynamic Payload type.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Try_Backup_RSC ua="na"/>
• In the phone web page, enter an appropriate
value.
Allowed values:
Default: 96
G722.2 Dynamic Payload
iLBC Dynamic Payload type.
Default: 97
iLBC Dynamic Payload
iSAC Dynamic Payload type.
Default: 98
iSAC Dynamic Payload
OPUS Dynamic Payload type.
Default: 99
OPUS Dynamic Payload
AVT dynamic payload type. Ranges from 96-127.
Default: 101
AVT Dynamic Payload
INFOREQ Dynamic Payload type.INFOREQ Dynamic Payload
H264 BPO Dynamic Payload type.
Default: 110
H264 BP0 Dynamic Payload
H264 HP Dynamic Payload type.
Default: 110
H264 HP Dynamic Payload
G711u codec name used in SDP.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<G711u_Codec_Name
ua="na">PCMU</G711u_Codec_Name>
• In the phone web page, enter an appropriate
codec name.
Allowed values:
Default: PCMU
G711u Codec Name
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
361
Cisco IP Phone Installation
SDP Payload Types

Cisco 8861 Specifications

General

Brand	Cisco
Model	8861
Category	IP Phone
Language	English