3 Features and benets
Individual remote controls
TCGB0106 rev.0 - 12/2014
3737
3
3.1.2 PC-ART
PC-ART: Remote control with timer
• Excellent display thanks to a large sized LCD screen, facilitating both programmable variable and possible alarm indi-
cation readings.
• Allows all indoor unit functions to be selected and changed.
• Optimum air conditioning control with its weekly timer.
• Malfunction or problem warnings with alarm code indications. There are 45 alarm codes for identifying and easily locat-
ing any fault or problem in the unit. The alarms are classied into groups to facilitate maintenance procedures.
• Just one remote control can control up to 16 indoor units.
• Operation lock procedure to avoid incorrect use of the buttons.
• Remote control data storage: The remote control stores all information on the status of the units at the time when the
last system alarm was triggered, allowing the user to easily ascertain the cause of the alarm and resolve the problem.
The remote control memory stores all of the pre-congured information of both the remote control and the connected
units.
• Built-in temperature sensor.
Operation Mode:
• “COOL” for cooling, “HEAT” for heating, “DRY” for dehumidication, “FAN” for ventilation and “AUTO” for automatic
cooling/heating changeover.
“VENTI” Option:
• VENTI: only activates the Total heat exchanger units.
• A/C: only activates the Air Conditioning unit.
• A/C+VENTI: activates both at the same time, also allowing a forced delay of 30 minutes or 1 hour when you want to
increase the equipment’s energy savings.
Additional functions:
• Weekly timer.
• Defrosting, frost protection.
• Clogged lter alarm.
To Next Page
Loading...
Need help?
General
