6 Building air conditioning controls
CSNET Manager LT/XT
TCGB0106 rev.0 - 12/2014
526526
6.2.4 Operation
6.2.4.1 USB memory connection
1 Plug in the USB memory in the USB port of the CSNET Manager.
2 Program starts up automatically.
3 Please wait until a window pops up.
4 This windows allows browsing the contents of the USB memory (instruction manuals in PDF les, system recovery,
etc.).
6.2.4.2 Start up process
1 Connect the power cable.
2 Connect the LAN1 cable.
3 Switch ON the CSNET Manager.
4 Wait until the screen is started and CSNET Manager software is launched automatically.
6.2.4.3 Conguration and display options
Through the “Conguration panel”, “Network settings” is possible to congure the following updates for the HARC and
CSNET WEB.
Version and updates
Version and updates gives the information to the user about which software is installed on the CSNET WEB device.
If the internet connection is properly congured, it can download updates for the HARC and install them just by clicking
the button.
CAUTION
HARC cannot be updated through a proxy.
Change password
The Change button beside Password setting opens the Change password panel.
To change your password:
- Enter the installer password. (The default factory password is “Installer”).
- Enter the new password.
- Repeat the new password to conrm it.
- Click the “OK” button to validate the changes and return to system conguration window.
NOTE
Only Installer password may be changed for CSNET Manager Server. User password will no longer be used for CSNET Manager Server.
Installation name
The name of the installation is the title of the main window. This lets you identify where CSNET WEB is connected.
To change the name of the installation rst enter the name you want and then click on the Change button by the “Installation
Name” line.
This takes you to the main window, where you can see that the title of the main page has changed.
To Next Page
Loading...
Need help?
General
