HP 3000 Series Handbook

For HP Internal Use Only
HP-UX ISL Boot Codes
Table 5-33. HP-UX ISL Boot Codes
Display Description
CBOO
Transfer-of control initiated by the firmware (also see the D*** codes)
I
CECO I Hpuxboot has been loaded a_qd initialization begun (realmain() has been entered)
CEDO
H puxboot has entered main()
CED2 I Hpuxboot is about to configure the I/0 system
CED4
H puxboot is about to mount the root file system
CEDA
Hpuxboot is about to list the contents of a directory
CEDB
H puxboot is about to load the kernel into memory
CEDC
Hpuxboot is about to start a copy operation
CEDD
Hpuxboot is about to stop (return to rdb)
CEDE
Hpuxboot is about to return to ISL
CEDF
H puxboot is about to launch the kernel
System Initialization Codes
Table 5-34. MPE/iX System Initialization Codes
Display Description
CFOO
Entering launch
CF02
Mapped system state
CF04
Allocating memory
CF08
Backing out into Genesis
CFOA
Entering Genesis
CF30
Initializing Genesis completed
CF40 Initializing resident kernel completed
CF50
Initializing non-resident kernel completed
CF60 CM SL binding completed
CF70
Configuring system I/0 completed
CF80 System volume initialized and mounted
CF90
Initializing CM OS completed
Table 5-35. HP-UX System Initialization Codes
Display
Description
CEEO
Kernel was loaded and initialization has begun (realmain() was entered)
CEFO
Kernel has entered main()
CEF2
Kernel is about to configure the I/0 system
CEF4
Kernel is about to mount the root file system
CEF6
Kernel is about to set up the page-out daemon
CEF8
Kernel is about to start the init process
Troubleshooting 5-37

HP 3000 Series Specifications

General

Brand	HP
Model	3000 Series
Category	Desktop
Language	English