HP 3000 Series Handbook

For HP Internal Use Only
SCSI;Console;LAN PCA Access Port Error Codes.
This is a list of the error codes that can occur when the TA command is used on
SCSI/Console/LAN PCA, P /N A1703-60003.
Table 5-39. TA Command Tests and Power-on Selftests
Test Test Description
Nmnber
1 OCT ART tests ( Never runs because oct art is always busy)
2 Flash ROM test
3
Firmware
ROM test
4 IODC ROM test
5
EEPROM test
6
Local port ENQ/ ACK test
7
Remote port ENQ/ ACK test
8
LAN loopback
test
If a test fails, the following message is displayed:
Additional Failure Information
TTTTSSSS HHHHHHHH HHHHHHHH
TTTT is the first two bytes of the self test number in ASCII hex.
SSSS is the second two bytes of the self test number in ASCII hex.
HHHHHHHH is for internal use only.
The selftest failure test codes are shown in Table 5-40.
Troubleshooting 5-39

HP 3000 Series Specifications

General

Brand	HP
Model	3000 Series
Category	Desktop
Language	English