HP 3000 Series Handbook

For HP Internal Use Only
5. Plug the cabinet power cord into the wall outlet.
6. The cabinet is now ready for operation.
Magnetic Door Catch
The magnetic door catch is located in the rear door, with catch plate on the left side cover.
Magnetic Door Catch Removal:
1. Open the rear door.
2. Grasp the magnetic door catch on the top and bottom. It is inside the rear door fold.
3. Simultaneously press
the top and bottom mounting tabs of the door catch, while pushing
the door catch out of the rear door.
4.
When the door catch mounting tabs are clear of the rear door opening, pull the door catch
out.
5. If the door catch plate needs to be removed, pry it off with a flat blade screwdriver. It is
stuck
on the side cover.
Magnetic Door Catch Replacement:
1. Align
the magnetic door catch back to the mounting hole in the rear door.
2.
Firmly press the door catch into the rear door mounting hole.
3. Press
the door catch until the mounting tabs snap into place and the door catch is firmly
locked
into place.
4.
If the door catch plate needs to be replaced, peel the adhesive cover off the back of the
catch plate. Then align it with the magnetic door catch and press it against the side cover
until firmly stuck.
Door Bumper
The rear door bumpers (one top and one bottom) are self-adhesive rubber bumpers stuck to
the rear door. To remove, pry it off with a flat blade screwdriver. To put a bumper on, peel
off
the adhesive cover, and press the bumper on the appropriate corner of the rear door.
Replaceable Parts 8-67

HP 3000 Series Specifications

General

Brand	HP
Model	3000 Series
Category	Desktop
Language	English