107
With no parameters specified, the command resets all sessions of the public network LDP instance.
Syntax
reset mpls ldp [ all | [ vpn-instance vpn-instance-name ] [ fec mask | peer peer-id ] ]
View
User view
Default level
1: Monitor level
Parameters
all: Specifies all LDP instances, including the public one and private ones.
vpn-instance vpn-instance-name: Specifies a VPN instance by its name, which is a case-sensitive string of
1 to 31 characters.
fec mask: Specifies a FEC by the destination IP address and mask.
peer peer-id: Specifies a peer by its LSR ID.
Examples
# Reset all sessions of the public network LDP instance.
<Sysname> reset mpls ldp
# Reset the sessions of all LDP instances.
<Sysname> reset mpls ldp all
# Reset the sessions of LDP instance vpn1.
<Sysname> reset mpls ldp vpn-instance vpn1
# Reset the sessions of a specified FEC.
<Sysname> reset mpls ldp 2.2.2.2 24
# Reset the session with a specified peer.
<Sysname> reset mpls ldp peer 2.2.2.9
reset mpls statistics interface
Description
Use the reset mpls statistics interface command to clear MPLS statistics for the specified MPLS interfaces.
Related commands: display mpls statistics interface.
Syntax
reset mpls statistics interface { interface-type interface-number | all }
View
User view
Default level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
all: Specifies all interfaces.
To Next Page
Loading...
Need help?
General
