HP 5800 Series User Manual

291
Network NextHop In/Out Label MED LocPrf
*^ i 10.0.0.0 1.1.1.1 1025 /NULL 0 100
Total Number of Routes: 1(vpn1)
Network NextHop In/Out Label MED LocPrf
* >i 10.0.0.0 1.1.1.1 0 100
Table 124 Command output
Field Description
BGP Local router ID Router ID of the local BGP router.
Status codes Route status codes. For valid values, see Table 113.
Origin Route origin codes. For valid values, see Table 113.
Network Network address in the BGP routing table.
NextHop Address of the next hop.
In/Out Label Incoming/outgoing label.
MED Metric associated with the destination network.
LocPrf Local preference value.
Total Number of Routes Total number of routes of the specified VPN instance.
display bgp vpnv4 routing-table label
Description
Use the display bgp vpnv4 routing-table label command to display information about labeled routes in
the BGP routing table.
Syntax
display bgp vpnv4 { all | vpn-instance vpn-instance-name } routing-table label [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Specifies all VPNv4 peers.
vpn-instance vpn-instance-name: Displays information about the specified VPN. vpn-instance-name is the
instance name of an MPLS L3VPN, which is a case-sensitive string of 1 to 31 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide..
begin: Displays the first line that matches the specified regular expression and all lines that follow.

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English