HP 5800 Series User Manual

353
display bgp vpnv6 vpn-instance peer
Description
Use the display bgp vpnv6 vpn-instance peer command to display information about the IPv6 BGP peers
in the specified VPN instance.
If you do not specify any optional parameters, the command displays the brief information of all IPv6
BGP peers.
Syntax
display bgp vpnv6 vpn-instance vpn-instance-name peer [ ipv6-address verbose | verbose ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: M o n i t o r
Parameters
vpn-instance-name: Specifies the name of a VPN instance, which is a case-sensitive string of 1 to 31
characters.
ipv6-address: Specifies the IPv6 address of a peer.
verbose: Displays the detailed information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display brief information about the IPv6 BGP peers in the VPN instance vpn1.
<Sysname> display bgp vpnv6 vpn-instance vpn1 peer
BGP local router ID : 2.2.2.2
Local AS number : 100
Total number of peers : 1 Peers in established state : 1
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
2001::1 200 4 6 0 2 00:00:09 Established
Table 140 Command output
Field Description
BGP local router ID Router ID of the local BGP router
Peer IPv6 address of the peer

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English